id=214 I have also seen WPA - Enterprise as just WPA.

You just have to find the common setting between the two devices.

wireless always validating identity-26

This means that you will have to disconnect (unplug) the cellular modem (aircard) from the computer and close the cellular connection manager tool provided by your cellular carrier or, disconnect from any LAN (wired Ethernet) or Wi-Fi (wireless) connections before you will be able to connect your computer to the router either by Ethernet cable or Wi-Fi.

By default, the wifi SSID will always be the model of the Cradlepoint router separated by a (-) and then the last 3 of the routers MAC address.

In order to connect to FVCC's wireless network, you will need your FVCC Logon ID (aka. If you don't know your FVCC Logon ID and password, please bring a photo ID to MIS.

This document is long, but you only need to read the section for the type of device you're trying to use to connect to the network.

Secondly you can change the SSID to what you want, and the channel to 1 or 11.

Then if your operating system is windowsxp please follow the attachment to have a try.(they sent me a file attachment with the email) If your operating system is vista please refer to

It looks like you are using WPA-EAP on your computer.

unless you are running into the initial problem that most older hardware had. You may need to do a firmware upgrade on your device that is connecting to the router. Firstly you can not use WPA, you can use WPA-PSK/WPA2-PSK or WEP.

When setting up WPA you will see the option for either a radius server (Enterprise, and you see this in the corporate environment) or a place to enter a passphrase (Pre Shared Key, PSK).